MAXPhotonics MFSC-1000X G4.0 Series User Manual

40
Chapter 6 Operation Guide
7
QBH installation
alarm
Install error of
QBH
The fault will be produced when
QBH head is not inserted in the
internal part of the cutting head; if this
cause is excluded, please contact
Maxphotonics.
8 Encrypted alarm
Laser encryption
expires
The ALARM indicator and ACTIVE
indicator on the front panel flash red
and green alternately. Please contact
Chuangxin customer service personnel
to continue normal use.

MAXPhotonics MFSC-1000X G4.0 Series Specifications

General

Brand	MAXPhotonics
Model	MFSC-1000X G4.0 Series
Category	Measuring Instruments
Language	English