13
Chapter 2 General Safety Information
We recommend that you comply with the following operating
measures to prolong the service life of the laser:
1、Do not expose the laser to a high moisture environment.
2、The device is equipped with cooling fans. Make sure that there is
sufficient airflow to cool the laser, any objects or debris that cover the
ventilation holes must be removed at all times.
3、Operation at higher temperature will accelerate aging, increase
threshold current and lower slop efficiency. If the device is overheated,
stop operations and contact Maxphotonics.
4、Ensure that the work surface is properly vented. There may be gases,
sparks and debris generated from the interaction between the laser and
the work surface, and they could pose additional safety hazard.
CAUTION :
◎ The device may be damaged with incautious operation.
To Next Page
Loading...
