MAXPhotonics MFSC 3000W Series User Manual

16
Chapter 3 Product Description
4 - Certification
Maxphotonics certifies that this equipment has been thoroughly tested
and inspected and meets published specifications prior to shipping. Upon
receiving your equipment, check whether the packaging and accessories
have been damaged in transit. If damage is apparent, please contact
Maxphotonics immediately.
5- Front Panel Description
M - F - S - C - XXX - XX
1 - 2 - 3 - 4 - 5 - 6
1 Manufacturer’s code M means Maxphotonics
2
Gain media of the
laser
F means Fiber Laser
3 Laser mode S means Single Mode
4 Laser state C means Continue Wave
5
Maximum output
power
XXXX W means the maximum output power of
the laser
6 Additional message Can be null
Items Function Description
MAIN SWITCH
380V main power switch of
laser
KEY SWITCH Power switch of laser
EMERGENCY
STOP SWITCH
Emergency stop
START
Start laser (on-off signal of
hardware)
ALARM
Abnormal situation light of
laser
ACTIVE
Normal situation light of
laser
POWER Power light of laser

MAXPhotonics MFSC 3000W Series Specifications

General

Brand	MAXPhotonics
Model	MFSC 3000W Series
Category	Measuring Instruments
Language	English