Maxspect R5 - Selecting and Previewing Presets

10
Operating Instructions
Selecting Preset
 Rotate the control dial to switch between the presets.
 Press the control dial to turn to the next page.
Apply
 Rotate the control dial to select “Apply”.
 Press the control dial to save the setting.
Preview
 Rotate the control dial to select “Preview”.
 Press the control dial to runs the program in preview
mode, where the entire preset is demonstrated in 3
minutes.
 Press and hold the control dial for 3s to return to the main
menu.
 Rotate the control dial to select “Exit”.
 Press the control dial to go back to the main menu.
English