MAXTEK 74275 - Micro SD Card Management; Micro SD Card Requirements; Inserting and Formatting Micro SD Card; Accessing Micro SD Card Files

25
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Micro SD Card
Micro SD Card Requirements
•MicroSDCard32GBorless
•Class4minimum.Class6maximum
Using a Micro SD Card
Insert the micro SD card in to the micro SD card slot on the body of
thecamera.Pushuntilitclicksintoplace.
Go through the menu settings and format the card.
Your card is now ready to record.
Toremovethecardpressitinuntilitclicks,thenletgoandpullthe
cardout.RemovingtheSDcardcancausethecameratoturnoffif
itisremovedwhilethecameraison.
Accessing the Micro SD Card
There are 2 ways to access the micro SD card.
Throughacardreader(notsupplied)orviatheminiUSBport.
Connect the mini USB cable to the camera and the other end to a
desktop/laptop.Putthecameraintomassstoragemode.
Usetheandbuttonstonavigatethroughtheoptionsanduse
the‘REC’buttontoselectMassStorage.