EasyManua.ls Logo

MAXTEK 79004 - Mounting The Camera; Standard Seat Pole Fitting; Aeroseat Pole Fitting

MAXTEK 79004
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
6
Standard Seat Pole Fitting
To mount the camera to a standard seat pole, thread the velcro
strap through the mounting loop. Place the camera in to the
preferred position on the seat pole, thread the strap through the
loop and secure rmly with the velco. If the camera angle is not
level then try using the other wedge either on it’s own or in
conjunction with the tted wedge.
Mounting The Camera
Aeroseat Pole Fitting
To mount the camera to an aeroseat pole, thread the velcro strap
through the mounting loop. Place the aeroseat adaptor to the
preferred position on the seat pole, place the camera against the
aeroseat adaptor. Thread the strap through the loop and secure
rmly with the velco. If the camera angle is not level then try using
the other wedge either on it’s own or in conjunction with the tted
wedge.
Standard Seat Pole Aero Seat Pole
Aeroseat Adaptor
Wedge
Wedge