51
Picture 4.11-12
Picture 4.11-12
4.11-8 Engineer Selection
1. USB debugging
After opening USB dbugging, you can use some software to read Tablet software, but when
USB debugging is turned on, USB storage needs to manual adjust.
2.Stay awake
If you open stay awake, it will never auto sleep when your Tablet is charging.
3.Pointer Location
If you open pointer location, it will display touch vertical and horizontal direction.
4. Show taps
If you open display touch screen operation, it will display touch operation on the screen. It
is suggested to use with same direction as pointer location.
5. Show surface updates
If you open screen refresh, it will display related area when the area is refreshing.
6. Show CPU usage
After open CUP usage, in the right top of Tablet will show CPU usage situation. as Picture
4.11-13
To Next Page
Loading...
