longer. Turn the knob counter-clockwise, and the ice size will be smaller in the
next cycle.
NOTE: It is not a good idea to adjust the ice size often or for no good reason, because the
controller may damaged.
7. If the red, green and yellow LEDs are flashing together, the machine is not
working. Call for service.
NOTE: Avoid letting water contact the control box.
Major Functions
1. Completely automatic operating procedure.
2. When the ice storage bin is full of ice cubes, the machine stops working
automatically and starts again after the cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. Indication of failure of major control.
5. The fan motor responds to the ambient temperature. If it is cold, the motor
will stop working to keep the cooling system in good working condition.
6. Ice cube size is adjustable.
7. A sensitive probe and accurate timer enhance the performance of the ice
maker.
8. Manual clean mode to start or stop the ice making system cleaning.
9. Built-in compressor protection system.
To Next Page
Loading...
