Maxx 20574 - Stopping Engine; Operating Blower

hold the unit firml
mer rime ump primer
m
additional 4 or 5 times.
move
m
difficult to start.)
Primer
filled
until engine fires(5 or 6 pulls)
f
m
position.
m "
s
l
m o
should
NOTE
If engine does not start after 5 pulls,
use cold start procedures.
STOPPING ENGINE
1.Move the throttle lever to the idling position
and press the stop switch until the engine
comes to a complete stop.
NOTE
Allow engine to warm up before use.
E
OPERATING BLOWER
WARNING DANGER
Always wear safety glasses, hearing
protection, a face filter mask and take all
safety precautions or serious personal
injury may result. Do not point the blower
pipe in the direction of people or pets.
-15-