Maxx 20574 - Transporting; Tool List

C. Observe the piston location through the
spark plug hole. Pull the recoil handle slowly
until the piston reaches the top of its travel
and leave it there.
7.Install the spark plug
（
do not connect
ignition cable
）
.
8. Remove blowy pipe assembly from unit.
TRANSPORTING
•Allow the engine to cool before transporting.
•Secure the unit while transporting.
•Tighten the fuel cap before transporting.
TOOL LIST
TOOL SPC
Socket Spanner 1E40F-6.13.1
-24-