EasyManua.ls Logo

MAXXMEE HIC-AF-8024LD - Danger of Electric Shock; Danger of Fire

MAXXMEE HIC-AF-8024LD
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hot Air Frying Machine
EN
17
stored away. Use oven gloves when handling the hot acces-
sories.
Never immerse the main unit and the connecting cable in wa-
ter or other liquids, and ensure that these components cannot
fall into water or become wet. There is a danger of electric
shock!
Do not pour any liquids (e.g. oil or water) directly into the
device or the drawer or place a liquid-fi lled vessel into the
device. It works exclusively with hot air.
The device must always be disconnected from the mains pow-
er when it is left unattended and before transporting or clean-
ing the device.
Do not make any modifi cations to the device. Also do not
replace the connecting cable yourself. If the device, the con-
necting cable or the accessories of the device are damaged,
they must be replaced by the manufacturer, customer service
department or a specialist workshop in order to avoid any
hazards.
The device is not designed to be operated with an external
timer or a separate remote control system.
Follow the instructions in the “Cleaning and Storage” chapter!
DANGER – Danger of Electric
Shock
Use and store the device only in
closed rooms.
Do not use the device in rooms with
high humidity.
Should the main unit fall into water,
switch off the power supply imme-
diately. Do not attempt to pull the
device out of the water while it is
connected to the mains power! Have
the device checked by a specialist
workshop before putting it back into
operation.
Never touch the main unit and the
connecting cable with wet hands
when the device is connected to the
mains power.
WARNING – Danger of Fire
Do not operate the device in the
vicinity of combustible material. Do
not place any combustible materials
(e.g. cardboard, paper, plastic) on or
in the device.
Do not connect the device along with
other consumers (with a high wattage)
to a multiple socket in order to pre-
vent overloading and a possible short
circuit (fi re).
Do not use any extension cables.
Do not cover the device during
operation in order to prevent it from
catching fi re. Do not insert anything

Table of Contents

Related product manuals