• Press the Home button, navigate to Alarm and press OK. press the [ ] button
on the remote control.
• Select either Alarm 1 or Alarm 2, choose Turn on to activate the Alarm.
• Follow the alarm wizard instructions to set the alarm.
• The wizard will guide you through the settings below:
Time ― Set the time for the alarm
Sound ― You can choose Wake to Tone, My Favourite, Wake to FM Radio or
Wake to DAB Radio or other media players as the alarm source.
Note - Wake to FM or Wake to DAB Radio - only the preset stations can
be used for the radio alarm (if the preset scan has been
completed).
Wake to My Favourite - Please preset your favorite station before
setting this as the alarm source.
Repeat ― You can schedule the alarm as you desire -Everyday, Once or multiple
days.
Alarm Volume ― Adjust the volume of the alarm as you like by rotating the
[Scroll/Select] knob or [▲/▼] button on remote.
Alarm Duration ― There are number of duration choices available. You can set
the preferred duration for the alarm to sound. When the time is
due, it wil turn off automatically.
• After the above settings are completed, press the [◄] button to exit and make sure
the Alarm is turned on. You will see the Alarm icon appeared on the display if it is
activated.
Note: If the selected alarm sources are not available, the wake to Tone will be
released.
Stopping the Alarm/Activate the Snooze function
When the alarm goes off, press the [ ] to stop the alarm or press in the
[Scroll/Select] knob to activate the Snooze feature.
When the Snooze is activated, the alarm is muted for 9 minutes and sounds again
when the time is due. You can repeat the process multiple times.
To stop the "Snooze" function, press the [ ].
13. Alarm Setting
To Next Page
Loading...