34
On completion of assembly please check again if all the screws have been tightened properly. Please also check that all
traction cables have not slipped and are running correctly over the rollers.
Be sure to clean all six chrome guide pipes before using the device for the rst time.
We recommend MAXXUS® degreaser spray for cleaning and MAXXUS® lubricant spray for lubrication of tubes and pipes.
Never use Teon based lubricants to lubricate the pipes and bars.
Clean and lubricate the sliding tubes 1 x per month. The traction cables should be cleaned regularly with a damp cloth and
soapy water. We recommend to repeat this every 4 months.
Assembly – Multipress
Chrome Guide Pipes of the
Traction Slide
Chrome Guide Pipes for the
Barbell Bar
Chrome Guide Pipes of the
Traction Elements
To Next Page
Loading...
Need help?
General
