Maxxus MX-K106-01 - User Manual

Questions and Answers

D
David MorrowSep 3, 2025
Why does my Maxxus MX-K106-01 sauna smell?
- E
  erinnunezSep 3, 2025
  The odor from the Maxxus Plumbing Product sauna could be due to a power supply problem. The power supply may need to be replaced.
B
burnsjohnSep 1, 2025
Why does my Maxxus MX-K106-01 Plumbing Product speaker not work?
- J
  Jamie ClarkSep 2, 2025
  If the speaker in your Maxxus Plumbing Product isn't working, it could be due to several reasons. The speaker itself might be broken, in which case you should replace it with a new one of the same specifications. Alternatively, the speaker wire might be loose, so disconnect and reconnect the speaker connections. Also, if the power indicator light for the CD is off, turn on the switch to start work.
C
clarkandreaAug 31, 2025
What to do if the indicator light for function is not working on my Maxxus MX-K106-01 Plumbing Product?
- M
  michael06Aug 31, 2025
  If the indicator light for function on your Maxxus Plumbing Product is not working, the heating indicator light might be broken, so replace the relevant control panel. Alternatively, the circuit board or components could be broken, in which case you should replace the circuit board. Finally, the temperature sensor might be broken, so check its connection.
R
Robert DodsonAug 29, 2025
What to do if the indicator light for power supply is not working on my Maxxus MX-K106-01 Plumbing Product?
- S
  smartinezAug 29, 2025
  If the indicator light for the power supply on your Maxxus Plumbing Product is not working, first check the connector to ensure it is properly connected; if not, check the connector or replace it. If the connector is fine, confirm that there is power supply input by checking your circuit breaker to ensure power at the wall outlet. If power is available, the indicator light itself may be broken, requiring you to replace the circuit panel.
B
baldwinchrisAug 28, 2025
Why does my Maxxus MX-K106-01 CD-Player doesn’t work?
- N
  natashagreenAug 28, 2025
  If your Maxxus Plumbing Product CD-Player isn’t working, there are several potential causes. First, check if the power connector is loose or damaged, and disconnect and reconnect the connection. If that doesn't solve the issue, the DC power supply might not be providing power to the CD-player, so check the DC power supply wiring or replace the power supply. The CD-player itself could be defective, requiring replacement. Lastly, check if the CD-player protection fuses are burnt out and replace them if necessary.
J
jamesmoraAug 26, 2025
How to resolve 'EP' on the temperature display of my Maxxus MX-K106-01?
- E
  Erin CervantesAug 27, 2025
  If your Maxxus Plumbing Product temperature display shows 'EP', it indicates a problem with the temperature sensor. The connector of the temperature sensor might be loose, not connected, or the sensor itself could be damaged. Try disconnecting and reconnecting the connector of the temperature sensor. If that doesn't work, you may need to replace the temperature sensor with a new one.
C
Cynthia EdwardsAug 25, 2025
How to fix Maxxus MX-K106-01 infrared heater not heating up?
- D
  Dylan JimenezAug 25, 2025
  If the infrared heater in your Maxxus Plumbing Product is not heating up, several factors could be the cause. First, the heater itself might be broken, requiring you to replace the heater panel. Also check that the wire junction or the heater’s wire is securely connected. Additionally, a broken temperature sensor can cause this issue, so check its connection. Finally, the circuit board or the relay might not be working, necessitating replacement of the circuit board.
D
Denise DixonAug 22, 2025
What to do if my Maxxus MX-K106-01 Plumbing Product light bulb is not working?
- K
  karen00Aug 22, 2025
  If the light bulb in your Maxxus Plumbing Product is not working, start by checking if the bulb is burned out and replace it if necessary. If the new bulb also doesn't work, the wiring might be loose, so check the connection and replace the lamp assembly if needed. If both of these solutions don't work, the electrical control panel might have issues, and you should replace the relevant control panel.

This document is an instruction manual for Maxxus Infrared Saunas, covering models MX-K106-01, MX-K206-01, MX-K306-01, and MX-K406-01.

Function Description:

The Maxxus Infrared Sauna is designed for indoor use to provide therapeutic benefits through far infrared heat. It aims to accelerate blood circulation, supply more oxygen to the body, diminish inflammation, relieve pain, speed up recovery, burn calories and fat, relax the body and mind, reduce toxins, and improve complexions. The sauna operates by emitting far infrared rays that penetrate the body, causing perspiration at lower temperatures compared to traditional saunas, which helps expel toxins and heavy metals.

Important Technical Specifications:

Electrical Requirements:
- 120V/15AMP dedicated circuit required for MX-K106-01 & MX-K206-01 models.
- 120V/20AMP dedicated circuit required for MX-K306-01 & MX-K406-01 models.
- The wall outlet must meet the specified requirements to avoid safety risks.
- No other appliance should be operated on the same electrical breaker as the sauna.
Temperature Range: The average used temperature range is between 118°F – 122°F.
Pre-heating: The sauna room must be pre-heated to the desired temperature before entering. Pre-heating may take longer if the ambient temperature is below 72°F. It is not recommended to use the sauna in an environment with an ambient temperature below 60°F.
Continuous Use: After 2 hours of continuous use, the sauna needs to be shut down for one hour.
Heaters: Equipped with infrared carbon heat emitter panels.
Materials: Available in Hemlock and Red Cedar models.
Safety Certifications: ETL Listed, Intertek 3189823.

Usage Features:

Control Panel: Features a digital sensor and thermometer, displaying temperature and timer.
- Temperature Setting: Users can increase or decrease the temperature using dedicated buttons. Pressing for three seconds allows for quick adjustment.
- Timer Setting: The timer can be set from 5 to 60 minutes using dedicated buttons. Pressing for three seconds allows for quick adjustment. The timer buzzes 5 minutes before the session ends and automatically shuts off after the set time.
- Power/Heat Button: Activates the sauna.
- Light Control:
  - Press the light button to turn the interior light ON.
  - Color Light Therapy System (optional): While the interior light is ON, press and hold the light button for 2 seconds to enter "light" mode (indicated by "2n" on the LED display).
Exterior light ON/OFF can be controlled from the control panel.
Interior light ON/OFF can be controlled from the control panel.
Pressing the light button scrolls through different colors. Two "white" selections are available: one for a sequence of different shades of colors, and another for continuous white light.
Press the light button again to return to Timer mode.
Ceiling Vent: Can be operated in the open or closed position.
Audio System (optional): Some models include a CD Player and speakers. The CD Player (radio) is not available on model MX-K106-01.
Accessories (optional): Cup-holder and magazine rack may be available on some models.
Fahrenheit/Centigrade Display: Can be switched by pressing and holding the temperature up and down buttons simultaneously, then pressing the light button.
Safety Precautions during Use:
- Do not use drugs, medications, or alcohol prior to or during the sauna session.
- Consult a physician if you have health conditions, are taking prescription drugs, or have acute joint injuries, or if you have surgical implants, obesity, heart disease, low/high blood pressure, circulatory problems, or diabetes.
- Pregnant or possibly pregnant women should consult their physician.
- Drink water prior to, during, and after sessions to replenish fluids.
- Do not touch heating elements to avoid burns.
- Exit immediately if feeling dizzy, sleepy, or any discomfort.
- Do not pour water or liquids on infrared emitters.
- Do not place combustible materials near heaters.
- Do not bump, hit, or break heating elements.
- Do not allow children to use the sauna unless closely supervised by an adult and prescribed by a medical physician.
- Never sleep inside the sauna.
- Do not use the sauna during an electrical storm.
- Do not make any modifications to the sauna.

Maintenance Features:

Cleaning:
- Unplug the sauna from the wall outlet before cleaning.
- Use plain water and a soft cloth for cleaning.
- Do not use liquid cleaners, aerosol cleansers, benzene, alcohol, or strong cleaning chemicals inside or on the sauna, as they can damage or be absorbed into the wood.
Storage:
- Avoid exposure to rain, snow, or other strong weather elements.
- Do not store in damp environments.
Troubleshooting: The manual provides a comprehensive troubleshooting guide for common issues such as:
- Indicator light not working (power supply, circuit board, temperature sensor).
- Infrared heater not heating up (heater broken, wire junction loose, temperature sensor, circuit board/relay).
- Odor from the sauna (power supply problem).
- Light bulb not working (bulb burned out, wiring loose, electrical control panel).
- Sauna not powering up (power cord unplugged, outlet, power supply/circuit panel).
- Temperature display errors ("EP" for loose/damaged sensor, "H" for high temperature).
- Speaker not working (speaker broken, wire loose, power indicator light off).
- CD-Player not working (power connector loose, DC power supply, defective CD-player, blown fuses).
Warranty:
- Limited Lifetime Warranty on heating elements and electronics from the original date of purchase for indoor use only. Outdoor placement voids this warranty.
- The radio and wood structure have a 1-year limited warranty.
- Warranty is void if the warranty card is not mailed back within 60 days of purchase with proof of purchase.
- Warranty does not cover negligence, alteration, modification, misuse, abuse, unauthorized repairs, inappropriate installations, or cases beyond manufacturer control, including use of lacquer/paints, non-approved accessories, outdoor applications, normal wear and tear, or use not in accordance with instructions.
- Surface cracks due to wood expansion and contraction are not considered defects.