To Next PageTo Next PageWhat to do if my Maxxus Plumbing Product sauna is not powering up?
If your Maxxus Plumbing Product sauna is not powering up, first ensure the power cord is securely plugged into the wall outlet. If it is, check your circuit breaker to confirm the outlet has power. If the problem persists, the power supply or circuit panel may be broken and require replacement.
How to fix the power supply indicator light not working on Maxxus MX-K306-01?
If the indicator light for the power supply on your Maxxus Plumbing Product is not working, start by checking the connector to ensure it is properly connected; if needed, replace it. Then, verify that there is power at the wall outlet by checking your circuit breaker. If the light still doesn't work, the indicator light itself, the heating indicator light, or the circuit board may be broken, requiring replacement of the circuit board or relevant control panel.
What to do if the light bulb is not working in my Maxxus MX-K306-01 Plumbing Product?
If the light bulb in your Maxxus Plumbing Product is not working, first remove the burned-out light bulb and replace it. If that doesn't solve the problem, check the light bulb wiring to ensure it's not loose; if it is, check the connection and/or replace the lamp assembly. If problems persist, the electrical control panel may need to be replaced.
Why is my Maxxus MX-K306-01 infrared heater not heating up?
If your Maxxus Plumbing Product infrared heater is not heating up, you should check that the wire junction or the heater’s wire is properly connected and tight. If connections are secure, the heater panel, temperature sensor, circuit board, or the relay might be broken, and the circuit board or heater panel may need to be replaced. Also check the connection of the temperature sensor.
How to troubleshoot a CD-Player that doesn’t work in Maxxus MX-K306-01?
If the CD-Player in your Maxxus Plumbing Product doesn’t work, first disconnect and reconnect the power connector. If that doesn't work, check the DC power supply wiring or replace the power supply. If the issue continues, the CD-player itself may be defective or the CD-player protection fuses may be burnt out, requiring replacement.
What to do if the speaker does not work in Maxxus MX-K306-01?
General| Product Type | Kitchen Faucet |
|---|---|
| Brand | Maxxus |
| Model Number | MX-K306-01 |
| Finish | Chrome |
| Valve Type | Ceramic Disc |
| Flow Rate | 1.8 GPM |
| Material | Brass |
| Aerator Included | Yes |
| ADA Compliant | Yes |
| Warranty | Limited Lifetime |
| Installation Type | Deck Mounted |
