Maytag 30" Freestanding Gas and Electric Ranges User Manual

Safety notice regarding California Proposition 65 and hazardous substances.

Location and importance of the model and serial number plate for identification.

Information on the range's wiring diagram and location.

Component for preventing tip-over hazards, requiring installation.

Detailed instructions for installing the anti-tip device as required by UL.

General steps for diagnosing and troubleshooting appliance issues.

Methods for testing electrical components using a multimeter.

Explanation and illustration of proper grounding and polarity checks.

Listing and identification of necessary test equipment for troubleshooting.

Visual guides for diagnosing specific operational failures.

Overview of electronic oven control systems for T1 and T2 models.

Troubleshooting flowchart for diagnosing why the oven will not bake.

Troubleshooting flowchart for diagnosing why the oven will not broil.

Troubleshooting flowchart for diagnosing why the self-clean function is not working.

Operation of the bake function for electric ranges on T1 models.

Operation of the bake function for electric ranges on T2 models.

Operation of the broil function for gas ranges on T1 & T2 models.

Operation of the bake function for gas ranges on T1 models.

Operation of the bake function for gas ranges on T2 models.

Operation of the variable broil function for electric ranges on T2 models.

Operation of the convection bake function for electric ranges on T1 models.

Operation of the convection bake function for gas ranges on T1 models.

Operation of dual-speed convection for electric slide-in ranges.

Operation of the drying function for slide-in electric ranges on T1 models.

Operation of the drying function for slide-in gas ranges on T1 models.

Operation of the drying function for electric ranges on T2 models.

Operation of the self-clean function for electric ranges.

Functionality of the motorized door lock on T1 & T2 models.

Operation of manual door locks on T1 & T2 models.

List and explanation of fault codes displayed on T1 and T2 controls.

Chart showing resistance values for oven temperature sensors.

Essential safety precautions when working with electrical components.

General steps to follow before performing service or repairs.

Requirements for the appliance's electrical supply and wiring.

Testing the spark ignition system.

Procedure for adjusting oven temperature on T1 models.

Procedure for adjusting oven temperature on T2 models.

Overview of the RS1 electronic oven control features.

General control features for RS1 models.

Operation of the bake cycle for electric ranges.

Operation of the bake cycle for gas ranges.

Operation of the broil cycle for electric ranges.