7= Select SOiL LEVEL
regular
SOil [eve[
Once you select a cycle, select the desire soil level by turning
the Soil Level knob to the desired setting.
8, Select wash temperature
cool
wash temp
Once you select a cycle, select the desire wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
Hot
Some cold water is added to save Whites and pastels
energy. This will be cooler than your Durable garments
hot water heater setting. Heavy soils
Warm
Some cold water will be added, so Bright colors
this will be cooler than what your Moderate to light soils
previous washer provided.
Cool
Warm water is added to assist in Colors that bleed
soil removal and to help dissolve _ or fade
detergents. Light soils
Cold
i:
Warm water may be added to assist i Dark colors that
in soil removal and to help dissolve bleed or fade
detergents. Light soils
TapCold :::
This is the temperature from your ii Dark colors that
faucet, bleed or fade
Light soils
9, Select cycle options, if desired
off on off on
extra rinse fabric softener
If you would like to add an Extra Rinse and/or Fabric Softener
option, turn the knob for that feature to ON.
fl- O.Press STARTIPauselUniock to
begin wash cycle
(_ start
pause/unlock
Press the START/Pause/Unlock button to start the wash cycle.
When the cycle has finished, the DONE indicator will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump out
automatically.
To Next Page
Loading...
