Special Indicators: Service Indicators:
CLEAN - appears at the end of a complete Refer to the "Before You Call For Service"
wash cycle. It will remain lit until the door has section if BLOCKED DRAIN, BLOCKED
been opened for 60 seconds. WASH ARM or WASH ARM appears in the
DELAY appears when the Delay pad is display. If any other code appears, contact yonJ
pressed. The time (in hours or minutes) is also servicer or Maytag Customer Service (U.S. 1-
displayed. 800-688-9900; Canada 1-800-688-2002).
DELICATE WASH - appears when this
option has been chosen with any wash cycle.
HEATED DRY- appears if Heated Dry is
selected. Adding a Forgotten Item
HEATING - appears when the water For proper cleaning, tile forgotten item should
temperature is low and the heating element is be added early in the cycle, while the wash
_,,-d._] / _ _is lit.
on during washing or rinsing portions of the _y...... _ram. J
cycle. It is NOT lit during the drying portion of 1. Unlatch the door and wait until the sound of
the cycle, circulating water stops.
LOCKED - appears when the Child Lock has 2. Open the door and add the item.
been activated.
3. Latch the door. The cycle will continue at th_
LOW RINSE AID - appears at the end of the point it was interrupted.
cycle as a reminder to add more rinse aid to the
dispenser in the door. It shuts off after the door
is opened.
PF - appears when there has been a power
failure. Any option selected before the
power failure will need to be reseleeted.
RINSED - appears after a Rinse & Hold cycle,
PAGE
To Next Page