4
10 Place Setting Load
Upper Rack
Glasses, cups, stemware, light-weight plastics, plates,
bowls, pans, long-handled utensils etc. can be loaded
in this rack. Do not load glasses over the tines.
T
he St
ack-Rack™ (select
models) on the right
side of the upper rack
folds up or down for
loading flexibility. Fold it
down to hold long-
handled knives, spatulas and spoons or short items
like cups or juice glasses. Fold it up for taller items like
glasse
s, bowls, plate
s, etc.
The edge of the Stack-
Rack™ (select models) is
designed to hold
stemware in place. Taller
stemware will fit better on
the right side as the
upper rack is deeper on
this side.
The Folding Tines (select
models) located in the
front right corner provide
convenient loading space
for large, bulky items like
pots and pans or mixing
bowls.
To lower tines, carefully push the tines out of each
holder toward the center of the rack and lay the tines
down.
The Cup Clips (select
models) located in the
center of the upper rack
can be used to hold
light-weight plastic items,
cooking utensils, knives,
etc. in place. Clip the
item between the tine
and the clip.
The V
ari-Lock™ Snugger
(select models) on the
left secure
s lightweight
items in place. It c
an be
adjusted by grasping the
wavy wire and rot
ating it
left to snug items against
the outer rack or to the
right to rest on top of light items.
Do not load items
on top of the wire.
F
or be
st re
sults with tall
glasses, rest the bottom of
the glass against the wavy
wire of the Vari-Lock™
Snugger (select models).
Loading
Upper Rack (Models with
folding and convertible bowl
tines in the lower rack)
Upper Rack (Models without
f
olding and convertible bowl
tines in the lower rack)
4 saucers are
loaded on the
rack under the
Stack-Rack™
Shelf
(select
models)
Lower Rack (Models
with folding and
convertible bowl
tines)
Lower Rack (Models
without folding and
convertible bowl tines)
3 saucers are
loaded on the
rack under the
Stack-Rack™
Shelf
(select
models)
To Next Page
Loading...
Need help?
General
