Removetowelfromdishwasher.Reinstallthelowerdish
rack.
If needed,seewebsiteforanimatedrepresentation
ofthisstep.Visitwww.maytag.com/anchoringunder
FAQtab.
Complete Installation
Check that grounding clip is attached to the lower panel.
Position the lower panel behind the access panel. On some
models there is insulation on the access panel which must
fall behind the insulation on the lower panel.
Hold the two panels together and place them against
dishwasher leg. Using a Phillips or 1A"screwdriver, reinstall
the screws through the holes in the access panel and the
slots in the lower panel.
Check that the lower edge of the lower panel contacts
the floor. Adjust if necessary.
Tighten access panel screws.
21
To Next Page
Loading...
Need help?
General
