C
Christina MaxwellJul 27, 2025
How to stop my Maytag Washer from vibrating, rocking, or walking?
- BbbrewerJul 27, 2025
To stop a Maytag Washer from vibrating, rocking, or "walking", make sure that both the front and rear feet are firmly touching the floor. The washer must be level to work correctly. Refer to the "Installation Instructions" for details. Also, check the floor for any flexing or sagging. If the floor is uneven, placing a ¾" (19 mm) piece of plywood under the washer can help reduce noise.