To Next PageTo Next PageWhy is my Maytag MVWB835DW4 vibrating?
To stop your Maytag Washer from vibrating, rocking, or “walking”, ensure the front and rear feet are in firm contact with the floor, and that the washer is level. You may need to check the floor for flexing or sagging. If the flooring is uneven, placing a ¾" (19 mm) piece of plywood under the washer can help reduce the noise and movement.
What to do if my Maytag MVWB835DW4 Washer is rocking?
To resolve rocking or “walking” with your Maytag Washer, make sure that its feet are making complete contact with the floor and are locked. Leveling the washer is crucial for proper operation.
General| Style | top load |
|---|---|
| Color | white |
| Washer Capacity | 5.3 cubic feet |
| Max Spin Speed | 850 revolutions per minute |
| Spin Speeds | 5 |
| Number of Cycles | 11 |
| Cycle Selections | rinse & spin, sanitize with oxi, bedding, deep water wash, power wash, normal, cold wash, wrinkle control, delicates, soak, clean washer |
| Options | oxi, extra rinse, deep clean, audio level, lid locked, sensing, wash, rinse, spin, done |
| Temperature Settings | 5 |
| Temperature Selections | cold, cool, warm, warmer, hot |
| Soil Levels | extra light, light, medium, heavy, extra heavy |
| Internal Heater | yes |
| Control Panel | dial, button |
| Delay Start / End | yes |
| Child Lock | no |
| Cycle Signal | yes |
| Interior Light | yes |
| Steam | no |
| Dispenser | single load |
| Smart Home | no |
| Annual Energy Consumption | 187 kilowatt hours |
| Voltage | 120 volts |
| Current | 15 amperes |
Weight and Dimensions| Depth | 28 inches |
|---|---|
| Height | 43 inches |
| Width | 27 1/2 inches |
| Net Weight | 134 pounds |
Explains DANGER and WARNING symbols used in the manual to communicate potential hazards.
Lists essential precautions to reduce risks during washer operation, including avoiding flammable substances.
Details the new washplate system, automatic sensing, HE detergents, and normal operational sounds.
Describes the power button, cycle knob, display, and available cycle modifiers like temperature and soil level.
Explains cycle options like Oxi, Extra Rinse, and status lights for sensing, wash, rinse, and done.
Details the liquid fabric softener, HE detergent, Oxi, and bleach dispensers and their proper use.
Provides a guide to selecting cycles based on item type, temperature, soil level, and spin speed.
Continues the guide with more cycles like Soak, Clean Washer, Rinse & Spin, Sanitize, Bedding, Deep Water, Power Wash.
Guides users on sorting, preparing laundry, adding products, and loading the washer correctly for best performance.
Provides detailed instructions on how to add HE detergent, liquid chlorine bleach, and fabric softener or Oxi.
Details how to select cycles, temperature, soil level, and options, and how to start the wash cycle.
Covers water inlet hose replacement, general washer care, and cleaning the interior and dispensers.
Provides instructions for preparing the washer for non-use, storage, or moving, including cleaning the dispenser.
Addresses common problems like vibration, unusual noises, and water leaks with potential causes and solutions.
Covers issues like washer not running, stopping, or problems related to incorrect detergent use.
Details problems with draining, spinning, wet loads, dry spots, and improper rinsing.
Addresses issues like sand/lint on clothes, tangling, poor stain removal, and dispenser malfunctions.
Covers fabric damage from washing, odors, lid lock problems, and detergent dissolving issues.
Lists specific error codes (LF, F#E#, etc.) and provides guidance for resolution.
Outlines the first and ten-year limited warranties, what is covered/not covered, and how to obtain service.
