7
5. Add fabric softener to dispenser
(on some models)
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer’s directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by lling the dispenser with warm
water until liquid reaches the underside of the rim. See max ll line
arrows. Then select Fabric Softener-Yes option.
IMPORTANT: Fabric Softener option must be selected to “Yes”
to ensure proper distribution at correct time in cycle.
Adding Liquid Fabric Softener Manually to Wash Load
During the nal rinse, wait until the washer has completed lling,
press the START/Pause/Unlock button to pause the washer. Lift the
lid and add the measured recommended amount of liquid fabric
softener. Do not allow liquid fabric softener to spill, splash, drip,
or run into the basket or on load. Do not use more than the
recommended amount. Close the lid and press the START/Pause/
Unlock button again to start the washer.
IMPORTANT: Fabric Softener option must be selected to “Yes” to
ensure proper distribution of the fabric softener during the rinse
portion of the cycle.
4. Add liquid chlorine bleach
to dispenser
Liquid
Chlorine Bleach
Do not overll, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Load garments in loose heaps evenly around basket wall. For
best results, do not pack the load tightly. Do not wrap large
items such as sheets around the agitator; load them in loose
piles around the sides of the basket. Try mixing different sized
items to reduce tangling.
3. Load laundry into washer
MAX FILL
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.
Turn cycle knob to choose your wash cycle. For more
information, see “Cycle Guide”.
6. Select cycle
To Next Page
Loading...
Need help?
General