Maytag MXR40 Programming Guide

80 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Front-Loading Multi-Load

OPL Commercial Washer

Programming Guide

MXS20, MXS25, MXS30, MXS40, MXS55, MXS65

MXR20, MXR25, MXR30, MXR40, MXR55, MXR65

Table of Contents ...........................................................................................................................................2

W10700670A

www.maytagcommerciallaundry.com

SELECT CYCLE

Table of Contents

Other manuals for Maytag MXR40

Service Manual124 pages

Installation Instructions28 pages

Questions and Answers:

A
Aaron LucasAug 7, 2025
What to do if the water level is incorrect in my Maytag Washer?
- H
  Holly SmithAug 7, 2025
  If you're experiencing an incorrect water level in your Maytag Washer, here are a few things to check: * Ensure the programmed water levels are correct. * Verify that the correct Machine Type is selected in the Configuration Menu. * If you've changed the Machine Type, remember that standard water levels can only be reinitialized by programming new values or by loading the Standard Wash programs again.
S
Shelly CarterAug 12, 2025
How to unlock Maytag Washer door after power outage?
- E
  Eugene PattersonAug 12, 2025
  To unlock the door of your Maytag Washer during a power outage: First, remove the front panel. Reach over the edge of the front panel on the door lock side. Push the emergency door opening button, then turn the door handle to the right. Finally, open the door.
M
malonebiancaAug 16, 2025
What to do if the display of my Maytag MXR40 Washer is not illuminated?
- W
  wardkeithAug 17, 2025
  If the display on your Maytag Washer is not illuminated, here's what you can check: * Ensure the external power supply is switched on and the washer is receiving external power. * Deactivate the emergency button. * Confirm the power connector is properly connected. * Inspect the wiring and ensure the connector is correctly connected. * If the display lights up after these checks, verify that the input signals or the +16Vdc Supply Signal are not touching the cabinet. * If there is no Flash Memory inserted in its socket on the wash computer, use the correct software and Flash Memory.
J
jacquelinegrahamAug 22, 2025
Why is my Maytag Washer showing 'Bootloader' and not running the application?
- J
  Jo FitzpatrickAug 22, 2025
  If your Maytag Washer display shows 'Bootloader' but the application doesn't run, it's likely because there's no software loaded in the application. To fix this, load the application software from the USB flash drive.
A
Alexis BishopAug 27, 2025
How to improve the readability of the text on my Maytag MXR40 display?
- J
  Jeremy EdwardsAug 27, 2025
  If the text on your Maytag Washer display is difficult to read, adjust the brightness and viewing angle in the Configuration Menu until the display is clear.
J
jenniferballSep 1, 2025
What to do if Maytag Washer displays an error message?
- J
  Jonathan BriggsSep 1, 2025
  To resolve error messages on your Maytag Washer, use the Diagnostic Program. This program will test the individual functions of the washer one by one to help determine the problem.

Maytag MXR40 Specifications

General

Brand	Maytag
Model	MXR40
Color	White
Energy Star Certified	No
Washer Type	Top Load

Related product manuals

Preview: Maytag MXR65

Maytag MXR Series

Preview: Maytag MXS20

Preview: Maytag MXS Series

Maytag MXS Series

Preview: Maytag MAV-1