9. Lit} the shelf straight out. 3. Remove the crisper drawers. (see page 5)
To replace the refrigerator shelf:
1. Keeping the shelf horizontal, gnide the three tabs
into the slots on the cabinet w_dl.
2. Lower the shelf until tile tabs lock into position.
Make sore the shelf is securely locked into posi-
tion before loading it with food.
To slide out the sheh,es:
Grasp the front edge of"the shelf and pull forward. Push
in shelf to return it to the o_5gina]position.
Adjustable Door Bins
Some refrigerator and fieezer door hins are adjustable To replace refrigerator door molding:
and can be easily removed. They are a complete bin, so
1. Replace crisper drawers. (see page 5)
itenls may be carried in the bin _dthout falling out.
When replacing the bin be sure it snaps into place. 2. Replace door molding by 'aligning the removable
piece over the fastener on the lower left portion of
the door liner and pivoting to the left.
3. Secure molding and seal in place.
4. Replace door bins securely in place.
To remove upper freezer door molding:
1. Remove top t?ceezer door bin.
2. (;rasp the lower right corner of the door molding and
firmly,push toward the middle of tile door.
3. Remove ice bin by lifting the front of the bin and
pulling fonvard. (see page 9)
Keepers and Tall Bottle Retainer
Some refrigerator door bins have "keepers" to secure _%
bottles and containers. Tile keepers help prevent itmns _%
from tipping or falling from side to side when the door _g
is opened and shut. On adjustable door bins Iift the _®_
keeper slightly' to slide from side to side.
The t_dlbottle retaJner located on to the fi'ont edge of one
bin prevents tall bottles from tipping fin'ward. _%_
Removable Door Molding
This feature is designed for kitcheus where space limi-
tations allow the doors to open only 90° making if diftL
cult to remove and clean tile crisper drawers, ieelnaker To replace upper freezer door molding:
and freezer basket. 1. Replace ice bin hy pushing it straight back until it
To remove the refrigerator door molding: stops, Lift it over the stop trod push baek into posi-
tion. (see page 9)
1. Remove tile bottom two door bins.
2. Replace door molding by aligning the remo*ahle
2. (;rasp the lower lef} comer of the door molding and piece over the fastener on the top right comer and
firmly push toward tile middle of the door. pivoting the bottom to the rigl/t.
3. Secure molding and seal in place.
4. Replace door bin securely in place.
PAGE 4
To Next Page
Loading...
