Maytag RCW2000DAE - Special Storage Areas; Freezer Basket; Crispers; Setting the Vari Crisper Control

=
To remove lower freezer door molding: Freezer Basket
._.
1. Remove the bottom freezer door bin. Yore-refrigerator has one freezer basket which glides out
2. Grasp the upper right comer of the door molding and _br more convenient access to frozen food. It can also be 0tQ.
f]rml) push toward the middle of the door. rernoved tbr cleaning. I_'
3. Remove freezer basket. To remove the basket:
_1 _ l. Pull the t,askct toward yell until it stops. Lift the front
I/_]_ i_ of the basket and pull until it stops again. _.
_il _i_- _ -- 2. Lift the basket up and o, er the front tabs. _
I i'" To replace the basket:
Reverse the above procedure.
SPECIAL STORAGE AREAS
__ Crispers
To replace lower freezer door molding: The Humidity Controlled Crispers allow the
amotmt of moisture in the drawer to be controlled for
1. Replace freezer basket, storing either fialits or vegetables.
2. Replace door molding by aligning the removable
piece over the fastener on the lower right comer and _"
pivoting the top to the right. FRUITS _ ;ETABLES
3. Secure molding and seal in place.
4. Replace door bin securely in place.
Freezer Shelves
The freezer shelves can he removed to acconnnodate Setting the Vari Crisper Control
large size packages and for cleaning. Move the slide control to "FRUITS" for low inoistm'e
To remove a shelf: en_fronment and "VEGETABLES" for high moisture.
1. Lift up on the shelf and push to the right. To remove the Crisper Drawers:
2. Tilt the left side of the shelf up and remo_e. 1. Pull out to the stop position.
To replace a shelfi 2. Tilt up the drawer front and pull out.
i. Tilt the shelf and insert the right rod ends into the To replace the Crisper Drawers:
upper portion of the oblong holes in the freezer wall. 1. Align the drawer rollers in the tracks.
2. Lower the left side of the shelf and insert into the 2. Lift the drawer front and push in.
oblong holes in the left side of the freezer wail. Make
sure the sheltis secnre hcfore loading. Meat/Cheese Drawer
, _s_ Fresh meat, luncheon meat and cheese need to be
, _ _ stored in the coldest part of the refrigerator to inaxirnize
_3 storage time. The Meal/Cheese drawer pro_zides these
colder temperatures because air from the t)eezer is
;" directed into the drawer.
Setting the Meat/Cheese Temperature
Control
To regulate the amount of cold air entering the
Meat/Cheese drawer, adjust the temperature control
PAGE5