EasyManua.ls Logo

Maytag W11099670B - User Manual

Maytag W11099670B
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Designed to use only
HE High Efficiency detergents.
Conçue pour l’utilisation d’un
détergent haute efficacité seulement.
If you have any problems or questions, visit us at www.maytag.com
Pour tout problème ou tout question, consulter www.maytag.ca
Use and Care Guide
Guide d’utilisation et d’entretien
Top-Loading High Efficiency Washer
Laveuse haute efficacité avec chargement par le dessus
Para obtener acceso
al Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.maytag.com.
W11099670B
W11099671B-SP

Table of Contents

Questions and Answers

  • A
    Amy JonesAug 20, 2025
    What to do if my Maytag W11099670B Washer won’t run or fill?
    • K
      Kyle ChapmanAug 20, 2025
      If your Maytag Washer won’t run or fill, stops working, or the wash light remains on, there are a few things to check. First, ensure that both water hoses are properly attached and have water flowing to the inlet valve. Also, check the inlet valve screens for clogs and ensure there are no kinks in the inlet hoses. Make sure the power cord is plugged into a grounded 3-prong outlet. Remember that the lid must be closed for the washer to operate. If the washer is tightly packed, remove some items and rearrange the load evenly. Finally, ensure you are using HE detergent and not using too much, as suds from regular detergents can hinder operation.
  • A
    Amy BarrettAug 22, 2025
    Why is my Maytag Washer leaking water?
    • J
      Jennifer ThomasAug 22, 2025
      If your Maytag Washer is leaking water, there are several potential causes to investigate. Ensure the washer is level, as water may splash off the basket if it is not. Check that the fill hoses are tightly attached and that all four fill hose flat washers are properly seated. Also, verify the drain hose connection is secure. Examine your household plumbing for any leaks or clogs in the sink or drain, as these can cause water to back up. Finally, ensure the washer is loaded as recommended, as unbalanced loading can cause splashing.
  • M
    michellecrossAug 25, 2025
    Why is my Maytag W11099670B Washer not draining or spinning properly?
    • H
      Heidi RogersAug 25, 2025
      If your Maytag Washer is not draining or spinning, leaving loads wet, or the spin light remains on, several factors could be responsible. Small items caught in the pump or between the basket and tub can slow draining, so empty pockets and use garment bags. Using a cycle with a low spin speed will also result in wetter loads. Make sure the washer is not tightly packed or unbalanced, and arrange the load evenly. Verify the drain hose is properly installed. Too much detergent can also cause excessive suds, slowing draining and spinning, so use only HE detergent and follow directions. To remove extra suds, select DRAIN & SPIN and the Extra Rinse option.
  • H
    Hector SnyderAug 26, 2025
    Why are there dry spots on my clothes after using my Maytag W11099670B?
    • D
      Dana FordAug 26, 2025
      If you notice dry spots on your load after a cycle in your Maytag Washer, it's likely due to the high-speed spins, which extract more moisture than traditional top-load washers. These high speeds, combined with airflow during the final spin, can cause items near the top of the load to develop dry spots. If needed, use the PowerWash® or Bedding cycle for a higher water fill, or select the Deep Fill setting.
  • B
    blackburnbryanAug 27, 2025
    Why is there not enough water in my Maytag W11099670B Washer?
    • E
      Eric TaylorAug 28, 2025
      If you observe that your Maytag Washer doesn't have enough water, it is normal for Auto Sensing Water Level mode. The load will not be completely under water because the washer senses load sizes and adds the correct amount of water for optimal cleaning performance in High Efficiency operation. You can also run a clean washer cycle to optimize the water level and wash performance. If needed, rearrange the load or select DRAIN & SPIN to remove extra water.
  • K
    Kathryn JohnsonAug 29, 2025
    Why is my laundry load not rinsed well in my Maytag W11099670B?
    • M
      Michael PattersonAug 29, 2025
      If your Maytag Washer load is not rinsed properly, it might be because the washer is tightly packed. A tightly packed washer is less efficient at rinsing.
  • J
    Justin WagnerAug 31, 2025
    Why is the lid locked light flashing on my Maytag Washer?
    • F
      Frank GrayAug 31, 2025
      If your Maytag Washer lid locked light is flashing, it means the lid is not closed properly. Ensure that the lid is fully closed, as the washer will not start or fill with the lid open.
  • E
    Eric MccoySep 2, 2025
    Why are the wash temperatures wrong on my Maytag W11099670B?
    • C
      Connor GallegosSep 2, 2025
      If you are experiencing incorrect or wrong wash or rinse temperatures with your Maytag Washer, start by checking for proper water supply. Ensure that the hot and cold inlet hoses are not reversed. Keep in mind that High Efficiency washers use cooler wash and rinse water temperatures than traditional top-load washers, as part of their energy-saving design.
  • S
    Sarah Stewart DVMSep 4, 2025
    What to do if my Maytag W11099670B Washer is making clicking noises?
    • J
      John Hines Jr.Sep 4, 2025
      If your Maytag Washer is making clicking or metallic noises, it could be due to objects caught in the washer drain system. Empty pockets before washing, as loose items like coins could fall between the basket and tub or block the pump. If you cannot remove the items yourself, it may be necessary to call for service.
  • A
    Aaron AllenSep 6, 2025
    Why is my Maytag W11099670B dispenser not working correctly?
    • D
      Destiny HopkinsSep 6, 2025
      If you're experiencing incorrect dispenser operation with your Maytag Washer, it may be due to clogged dispensers or laundry products dispensing too soon. Avoid overfilling the dispenser, as this causes immediate dispensing. Also, only use liquid chlorine bleach in the bleach dispenser.

Summary

Washer Safety

Safety Alert Symbol

Explains the purpose of the safety alert symbol and associated danger warnings.

Understanding Danger and Warning

Defines the meaning of 'DANGER' and 'WARNING' in safety instructions.

Important Safety Instructions

Fire and Explosion Hazards

Precautions against flammable substances and hydrogen gas risks.

Electrical and Operational Safety

Guidelines for child safety, appliance operation, and maintenance.

Whats New Under the Lid?

More Water When You Need It

Explains the Dual Wash Agitator System and water level features.

Automatic Load Size Sensing

Describes how the washer senses load size for water level adjustment.

Choosing the Right Detergent

Guidance on using only High Efficiency (HE) detergents for optimal performance.

Normal Sounds You Can Expect

Information about the typical sounds the washer makes during operation.

Control Panel and Features

Power Button

Controls the washer's power and cycle status.

Wash Cycle Knob

Used to select the desired wash cycle for laundry.

Estimated Cycle Time Display

Shows the estimated time required for the selected cycle to complete.

Delay Start Option

Allows delaying the start of a wash cycle for up to 12 hours.

Start;Pause Button

Used to start, pause, or restart a wash cycle.

Cycle Modifiers

Options that adjust cycle settings like temperature and soil level.

Cycle Options

Additional features that can be added to most cycles for enhanced cleaning.

Cycle Status Lights

Lid Locked Status

Indicates when the washer lid is locked for operation.

Sensing Process

Describes the washer's load size and water level sensing.

Wash Cycle Phase

Indicates the main washing stage of the cycle.

Rinse Cycle Phase

Indicates the rinsing stage of the cycle.

Spin Cycle Phase

Indicates the spinning stage for water removal.

Cycle Completion

Indicates when the wash cycle has finished.

Deep Fill & Auto Sensing Water Levels

Explains status lights for water level selection modes.

Laundry Product Dispensers

Liquid Fabric Softener Dispenser

Compartment for dispensing liquid fabric softener.

HE Detergent Dispenser

Dispenser for High Efficiency liquid or powder detergent.

Oxi Dispenser

Compartment for Oxi booster or color-safe bleach.

Liquid Chlorine Bleach Dispenser

Dispenser for liquid chlorine bleach.

Cycle Guide

PowerWash Cycle

For heavily soiled or sturdy items.

Colors Cycle

For darks, colors, mixed loads, and activewear.

Bedding Cycle

For large items like sheets and comforters.

Sanitize with Oxi Cycle

Eliminates 99.9% of bacteria with Oxi option.

Drain & Spin;Extra Rinse and spin Cycle

Combines spin with rinse options.

Normal Cycle

For normally soiled cottons and mixed fabric loads.

Cold Wash Cycle

Washes with cold water and gentle action for fabrics.

Wrinkle Control Cycle

For no-iron fabrics, casual clothes, and permanent press.

Delicates Cycle

For lightly soiled, small items, or 'gentle' care labels.

Rapid Wash Cycle

Quickly washes lightly soiled garments and small loads.

Clean Washer with affresh Cycle

Cleans the washer interior every 30 washes.

Using Your Washer

Sort and Prepare Laundry

Steps for sorting and preparing clothes before washing.

Add Laundry Products

Guidance on adding detergents and other laundry products.

Load Laundry into Washer

Instructions on how to properly load the washing machine.

Using Laundry Product Dispensers

Add HE Detergent

Instructions for adding High Efficiency detergent to the dispenser.

Add Liquid Chlorine Bleach

Guidance for using the liquid chlorine bleach dispenser.

Add Fabric Softener or Oxi

Instructions for adding fabric softener or Oxi boosters.

Turn On Washer

How to power on the washing machine to start a cycle.

Selecting Wash Settings

Select Cycle

Choose the appropriate wash cycle based on fabric type and soil level.

Select Temperature

Adjust water temperature based on fabric care labels and soil.

Select Soil Level

Set the soil level to match the load's dirtiness for optimal cleaning.

Select Spin Speed

Choose the spin speed for effective water removal.

Select Cycle Options

Add optional features like Extra Rinse or Oxi for enhanced performance.

Select Deep Fill Mode

Option to add more water for specific load needs.

Start Wash Cycle

Initiate the selected wash cycle by pressing the Start/Pause button.

Washer Maintenance

Water Inlet Hoses

Recommendations for inspecting and replacing water inlet hoses.

Cleaning the Washer Interior

Procedures for cleaning the inside of the washer, including cycles and cleaners.

Cleaning the Dispensers

Instructions for removing residue from washer dispensers.

Cleaning the Washer Exterior

Guidance on cleaning the outside surfaces of the washing machine.

Dispenser Drawer Cleaning

Removable Dispenser Drawer Cleaning Procedure

Step-by-step guide to clean the removable laundry product dispenser drawer.

Washer Storage and Transport

Transporting Your Washer

Instructions for safely moving the washing machine.

Winter Storage Care

Procedure for protecting the washer from freezing during storage.

Non-Use and Vacation Care

Steps to take when the washer is not in use for a period.

Reinstalling;Using Washer Again

Procedure for preparing the washer after a period of non-use or storage.

Troubleshooting

Vibration or Off-Balance Issues

Solutions for problems related to washer vibration and load balance.

Normal Operating Sounds

Information about expected noises during normal washer operation.

Water Leaks

Troubleshooting steps for identifying and fixing water leaks.

Washer Not Performing as Expected

Guidance for common issues like insufficient water or improper operation.

Troubleshooting (cont.)

Washer Wont Run or Fill

Troubleshooting steps for a washer that fails to start or fill with water.

Washer Not Draining;Spinning

Solutions for issues with draining, spinning, or wet loads.

Troubleshooting (cont.)

Dry Spots After Cycle

Explanation for dry spots on laundry after the wash cycle.

Incorrect Wash;Rinse Temperatures

Troubleshooting temperature-related washing issues.

Load Not Rinsed Properly

Solutions for loads that are not adequately rinsed.

Troubleshooting (cont.)

Residue on Load After Washing

Addressing issues with sand, pet hair, or detergent residue.

Load Tangling Issues

Tips to prevent or resolve tangling of clothes during washing.

Stain Removal Problems

Solutions for issues related to not cleaning or removing stains from laundry.

Troubleshooting (cont.)

Incorrect Dispenser Operation

Troubleshooting issues with how laundry products are dispensed.

Fabric Damage

Causes and solutions for damage to fabrics during washing.

Odors

Addressing and preventing odors in the washer or on laundry.

Lid Locked Light Flashing

Interpreting and resolving a flashing lid lock indicator.

Detergent Not Dissolving

Solutions for powdered or single-dose packets not dissolving.

Maytag Laundry Limited Warranty

Need Service or Parts?

Information on how to get service or order replacement parts and accessories.

Warranty Coverage Details

Explains what is covered and not covered under the Maytag warranty.

Warranty Disclaimers and Limitations

Legal disclaimers regarding implied warranties and remedies.

Assistance and Service Information

Getting Replacement Parts or Accessories

Information on how to order FSP® specified parts and accessories.

Customer Support Assistance

Details on who to contact for appliance features, maintenance, and referrals.

Contact Information for Inquiries

Addresses and phone numbers for Maytag customer experience centers.

Maytag W11099670B Specifications

General IconGeneral
BrandMaytag
ModelW11099670B
CategoryWasher
LanguageEnglish

Related product manuals