Maytronics Dolphin S100 - Impeller Cleaning Procedure; Removing Impeller Debris

11
Robotic Pool Cleaner Mass 10 | User Instructions
CAUTION
Make sure the power supply is switched off and unplugged.
8.1 Clean the debris trapped in the impeller opening, according to the following
steps:
8. CLEANING THE IMPELLER
If you notice debris trapped in the impeller:
Pull the impeller cover backwards to release it.
Clean the debris trapped around the impeller.
Assemble the impeller cover.
If the debris is not reachable follow the next
steps.
Using a short
screwdriver open the 2 screws.
8.1.3
8.1.1 8.1.2