Maytronics Dolphin X40 Plus User Manual

Your robot has a Weekly Timer feature that enables
you to set an automatic cleaning schedule for
the week ahead.
When the power supply is switched on, you can press the
Weekly Timer button to select one of the following cleaning
schedule options for the week ahead:
Dolphin Power Supply
Advanced Operation
(Dolphin X40+):
1. You can program the power supply at any time.
See the relevant section below for more details on each program.
2. If no program is selected, the robot will perform a single cleaning
cycle.
Weekly Timer
The robot will automatically work every day for a full cycle,
The robot will automatically work every alternate day for a full cycle,
The robot will automatically work every 3 days,
When the LED under the Full Cycle icon is lit: The robot will work in the regular manner.
When the LED under the Fast mode icon is lit: The robot will work in fast mode.
In this mode, the cycle duration is one hour and the robot cleans the pool floor only.
Note: Once Fast Mode is selected, the robot will continue to work in Fast Mode every time. To revert
to the standard cleaning method, press the button. The LED under the Full Cycle icon will light up.
After selecting one of the above options, the robot will start to operate at the next occurrence
of the programmed start time.
Note: A fourth click will cancel the cleaning schedule program (without a visible indication).
If the robot is working in Weekly Timer mode, the Weekly Timer button constantly blinks between cycles.
At the end of the week, the power supply automatically switches off and you need to reschedule the robot.
Regular/Fast Mode
Your robot has a Fast Mode feature that enables you to select
a fast cleaning cycle instead of a standard cleaning cycle.
that is, once a day for 7 days.
that is, 4 times in a week.
that is, 3 times in a week.
Three clicks
Two clicks
One click
R
Bluetooth Connection
Weekly Timer
Smartphone Control
Fast Mode
Delayed Operation
ON/OFF

Maytronics Dolphin X40 Plus Specifications

General

Brand	Maytronics
Model	Dolphin X40 Plus
Category	Swimming Pool Vacuum
Language	English

Summary

Advanced Operation

Weekly Timer Setup

Program automatic cleaning schedules for the week ahead by clicking the Weekly Timer button.

Fast Mode Indicators

Indicators for regular and fast mode cleaning cycles. Fast mode cleans the floor for one hour.

Delayed Operation

Delayed Operation Indicator

The LED under the Delayed Operation icon indicates a two-hour cleaning start delay.

Bluetooth and Smartphone Connectivity

Bluetooth Connection Indicator

LED on indicates paired smartphone is identified nearby. Requires phone Bluetooth activation.

Smartphone Control Activation

Activate via the MyDolphin™ application. Smartphone programming overrides power supply controls.

Caddy Assembly

Safety and Operational Guidance

Cautions and Warnings

Essential safety precautions including power supply use, electrical safety, and pool entry rules.

Helpful Hints

Tips for optimal performance, including power supply placement, brush soaking, cable management, and storage.

Robot Operation and Maintenance

Robot Setup and Pool Entry

Instructions for unwinding the cable, positioning the power supply, and placing the robot in the pool.

Filter Cleaning

Procedure for cleaning the filter basket and its components after each cleaning cycle.

Impeller Cleaning

Guidance on how to clean debris trapped in the robot's impeller.

Storage Instructions

Recommended methods for storing the robot in a cool, dry place, away from direct sunlight.