2-4
Essential Safety Equipment
Seats
Form No. 8Q94-EA-02G
▼
Seat Tilt (Driver’s Seat)
The seat-bottom angle can be adjusted by
rotating the dial.
▼
Head Restraint
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
parallel with the top of the passenger’s
ears, never the passenger’s neck.
Up
Down
Dial
Front of seat bottom
Up
Down
Dial
Rear of seat bottom
Head Restraints Adjustment:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Always drive with the head restraints
inserted when seats are being used
and make sure they are properly
adjusted.
To Next Page
Loading...
