Mazda 2003 Protege - Seat Belt Warning Light; Seat Belt Warning Beep

2-21
Essential Safety Equipment
Seat Belt Systems
Form No. 8Q94-EA-02G
If the driver’s seat belt is not fastened
when the ignition switch is turned to the
ON position, the seat belt warning light
will remain on until the belt is fastened.
If the system does not operate correctly,
consult an Authorized Mazda Dealer.
If the driver’s seat belt is not fastened
when the ignition switch is turned to the
ON position, a beep will sound for about
6 seconds.
Seat Belt Warning Light Seat Belt Warning Beep
J39L_EA.book Page 21 Saturday, June 8, 2002 5:35 PM