Mazda 2003 Protege - Electrical System; Lubricant Quality

10-4
Form No. 8Q94-EA-02G
Specifications
▼
Engine
▼
Electrical System
*
Only for MAZDASPEED Protegé
▼
Lubricant Quality
*
Refer to the recommended SAE viscosity numbers on page 8-9.
Specifications
Item
Model
1.6-liter engine 2.0-liter engine
Type DOHC-16V in-line, 4-cylinder
Bore×Stroke 78.0 × 83.6 mm (3.07 × 3.29 in) 83.0 × 92.0 mm (3.27 × 3.62 in)
Displacement 1,598 ml (1,598 cc, 97.5 cu in) 1,991 ml (1,991 cc, 121.5 cu in)
Compression ratio 9.0 9.1
Item
Model
1.6-liter engine 2.0-liter engine
Battery 12V-40AH/5HR
12V-40AH/5HR
12V-52AH/5HR
Alternator 12 V-70 A 12 V-80 A
Starter 12 V - 1.0 kW 12 V - 1.0 kW
Spark-plug number
MAZDA — BP13 18 110, BP14 18 110
NGK ZFR5F-11, ZFR6F-11
BKR5E-11, BKR6E-11, PZFR6F
*
DENSO KJ16CR11, KJ20CR11 K16PR-U11, K20PR-U11
CHAMPION — RC8YC4, RC10YC4
Spark-plug gap
1.0—1.1 mm (0.040—0.043 in), 0.7—0.8 mm (0.028—0.031 in)
*
Lubricant
Classification
API Service ILSAC
Engine oil
*
SG (Energy Conserving II) —
SH (Energy Conserving II) GF-I
SJ GF-II
SL GF-III
Lubricant Classification
Manual transaxle oil
Any temperature
API Service GL-4 or GL-5
SAE 75W-90
Above 10°C (50°F)
API Service GL-4 or GL-5
SAE 80W-90
Automatic transaxle fluid ATF M-V
Power steering fluid ATF M-III or equivalent (e.g. Dexron® III)
Brake/Clutch fluid SAEJ1703 or FMVSS116 DOT-3
J39L_EA.book Page 4 Saturday, June 8, 2002 5:35 PM