8-39
Maintenance and Care
Owner Maintenance
Form No. 8Q94-EA-02G
If the headlights or other electrical
components don’t work and the fuses in
the cabin are OK, inspect the fuse block
under the hood. If a fuse is blown, it must
be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
3. If a fuse is blown, replace it with a new
one
of the same rating.
NOTE
To replace the MAIN fuse, contact an
Authorized Mazda Dealer (page 8-40).
Tab
Fuse block
cover
Normal Blown
J39L_EA.book Page 39 Saturday, June 8, 2002 5:35 PM
To Next Page
Loading...
