4-9
Before Driving Your Mazda
Driving Tips
Form No. 8Q94-EA-02G
▼
Tire Chains
Check local regulations before using tire
chains.
Install the chains on the front tires.
Don’t use chains on the rear tires.
Use only SAE Class "S" chains, and make
sure they fit.
Installing the chains
1. Remove the wheel covers, or the chain
bands will scratch them.
2. Secure the chains on the front tires as
tightly as possible. Always follow the
chain manufacturer’s instructions.
3. Retighten the chains after driving
1/2—1 km (1/4—1/2 mile).
•
Chains may scratch or chip
aluminum wheels. Install tire chains
on steel wheels only.
•
Chains may affect handling.
•
Don’t go faster than 50 km/h (30
mph) or the chain manufacturer’s
recommended limit, whichever is
lower.
•
Drive carefully and avoid bumps,
holes, and sharp turns.
•
Avoid locked-wheel braking.
•
Don’t use chains on the temporary
tire; it may result in damage to the
vehicle and to the tire.
•
Don’t use chains on roads that are
free of snow or ice. The tires and
chains could be damaged.
NOTE
(MAZDASPEED Protegé)
Use of tire chains on a vehicle
equipped with 215/45ZR17
specification tires and rim could cause
interference with the vehicle body and
scratching. If tire chains are to be used,
replace both front and rear tires with
P195/50R16 tires. Please consult an
Authorized Mazda Dealer.
CAUTION
J39L_EA.book Page 9 Saturday, June 8, 2002 5:35 PM
To Next Page
Loading...
