5. Press the up or down part of the
INFO switch to change the set distance
or time, and press the INFO button. If
no changes are necessary, press the
INFO button.
NOTE
l
The initial setting values are displayed
corresponding to the maintenance schedule
(except some countries). For each regional
maintenance schedule, Refer to Scheduled
Maintenance on page 6-4.
l
is displayed on the set items.
Message display
When the remaining time or the distance
approaches 0, a message is displayed each
time the ignition is switch ed ON.
NOTE
l
If any of the INFO switches (up , down
, or INFO button) is pressed while a
message is displayed, it will no longer be
displayed the next time the ignition is
switched ON.
l
After the vehicle is serviced and the
remaining time/distance is reset, the
message for the next maintenance period
will be displayed when the remaining
distance or time to the next maintenance
period approaches 0 (displays when engine
is started).
l
If there are multiple messages, they are
displayed according to their order.
l
If OFF is set for Messages, messages are
not displayed.
4-16
When Driving
Instrument Cluster and Display
To Next Page
Loading...
