Mazda 2014 CX-5 - Commands Useable Anytime During Voice Recognition; Help Function Use; Returning to Previous Operation

NOTE
l
The Bluetooth
®
Hands-Free system is
operable several seconds after the ignition
is switched to ACC or ON (requires less
than 15 seconds).
l
When operating the audio unit or the A/C
while using Bluetooth
®
Hands-Free, the
beep sounds or voice guidance (audio unit)/
cannot be heard.
Tutorial
The tutorial explains how to use
Bluetooth
®
Hands-Free.
The available tutorial items are General,
Phone, and Audio.
To activate the tutorial, do the following:
1. Press the talk button.
2. Prompt: “Ready”
3. Say: [Beep] “Tutorial”
4. Prompt: “Tutorial”
5. Say: [Beep] “XXXXX... (Tutorial
item)”
6. Follow the prompts to receive the
appropriate voice guidance
instructions.
Commands useable anytime during
voice recognition
“Help” , “Go Back” , “Cancel” , “Di splay
OFF/Display ON ” are commands which
can be used at anytime during voice
recognition.
Help function use
The help function informs the user of all
the available voice commands under the
current conditions .
1. Say: [Beep] “Help”
2. Follow the prompts to receive the
appropriate voice guidance
instructions.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] “Go Back”
Cancel
The Bluetooth
®
Hands-Free system
transitions to standby status if the
following operation is performed while
the system is activated.
Say: [Beep] “Cancel”
Display OFF/Display ON
The audio unit display can be switched
off/on by voice recognition operation.
Say: [Beep] “Display OFF ” (or “Display
ON”)
To prevent a deterioratio n in the voice
recognition rate and voice quality, the
following points should be observed:
l
The Hands-free system cannot perform
voice recognition while voice guidance
or a beep sound is operating. Wait until
the voice guidance or the beep sound is
finished before sayin g your commands.
l
Dialects or different wording other than
Hands-Free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
l
It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
l
Do not speak too slow or too loud.
l
Speak clearly, without pausing between
words or numbers.
5-82
Interior Features
Bluetooth®