Message display
Item Start of message display Displayed message
Scheduled
Maintenance
When remaining distance is less than
500 km (250 mile), or remaining days are
less than 15 (whichever comes first)
Scheduled Maintenance Due
Tire Rotation When remaining distance is less than
500 km (250 mile)
Tire Rotation Due
Tire Pressure Check When remaining days are less than 15 Tire Pressure Increase Pressure
Reset method
If resetting is performed after a
maintenance has been completed, a
notification of the next maintenance
period will be displayed when the period
approaches.
1. Press the up
or down part of the
INFO switch and select Settings, and
then press the INFO button.
2. Press the up
or down part of the
INFO switch and select Maintenance,
and then press the INFO button.
3. Press the up
or down part of the
INFO switch to select the item you
want to reset from the following, and
then press the INFO button.
l
Scheduled
l
Tire Rotation
l
Tire Pressure
NOTE
l
The current remaining distance and time is
displayed.
l
Even if the remaining distance or time have
surpassed 0, the display does not display a
minus (
_
) and leaves the value at 0.
4. Press the up or down part of the
INFO switch and select Set Time or Set
Distance, and then press the INFO
button. The remaining time and
distance values return to the values
previously set. If no changes are
necessary, press the INFO button.
NOTE
l
If the settings are changed from the initial
values, the values which you set are
displayed, not the initial values.
l
Even if the battery is disconnected, the
remaining distance and time information is
not erased.
When Driving
Instrument Cluster and Display
4-17
To Next Page
Loading...
