Mazda 2014 CX-5 - Audio Operation Using Voice Recognition; Dont Disturb Me Function; Erasing Messages; Starting the Audio

4. Select the sentence to be sent from the
preset messages.
5. Press the
on-screen button.
NOTE
The preset messages cannot be changed.
Erasing messages
Downloaded messages can be erased.
1. Touch the
on-screen tab.
2. Touch the message you want to erase.
3. Touch the
on-screen button.
4. Touch the
on-screen button.
NOTE
The messages stored in a device cannot be
erased.
qDon't Disturb Me function
A setting can be made to not notify you of
incoming phone calls and messages.
1. Touch the
on-screen tab.
2. Touch the
on-screen
button.
3. To set, touch the
on-screen button
or the
on-screen button.
4. Touch the
on screen button.
NOTE
The following operations are possible even
when the Don't Disturb Me function is on.
l
Downloading messages
l
Downloading phone books
l
Downloading the incoming/outgoing call
record
l
Sending messages
qAudio Operation Using Voice
Recognition
Audio on/off, audio mode switching, and
audio operations can be done using voice
recognition.
NOTE
(When playing a USB or iPod)
When a track is selected using voice
recognition, the track list is set to VR Playlist.
Starting the audio
The audio can be started using voice
recognition.
1. Press the talk button.
2. Prompt: “Ready”
3. Say: [Beep] “Turn on audio”
4. Power to the audio is turned on.
Turning off the audio
1. Press the talk button.
2. Prompt: “Ready”
3. Say: [Beep] “Change mode”
4. Prompt: “Avail able audio modes are:
AM, FM, FM1, FM2, Sirius, Sirius1,
Sirius2, Sirius3, USB, iPod,
Bluetooth
®
audio, Pandora
®
, CD,
AUX, Turn off audio”
5. Say: [Beep] “Turn off audio”
6. Power to the audio is turned off.
Switching modes
1. Press the talk button.
2. Prompt: “Ready”
3. Say: [Beep] “Change mode”
5-90
Interior Features
Bluetooth®