Item Feature Factory Setting Available Settings
Auto headlight off
*3
The time required for headlights to turn off
after ignition is switched off can be changed.
30 seconds
0 seconds
*4
/
60 seconds/
90 seconds/
120 seconds
Auto-light control
The headlight illumination on/off timing based
on surrounding lightness/darkness can be
changed.
Medium
Light/Medium
Light/Medium
Dark/Dark
For the function setting procedure, Refer to Setup on page 5-55.
*1 Setting changes using the door-lock switch can also be done. Refer to Auto Lock/Unlock Function on page
3-14.
*2 Settings can be changed using the transmitter button. For the changing procedure, Refer to Locking, Unlocking
with Request Switch (With the advanced keyless function) on page 3-11.
*3 If the setting is changed to 0 seconds, the following operation is performed according to the headlight switch
position:
l
At position: Headlights turn off immediately after the ignition is switched off.
l
At any position other than : Headlights do not turn off after the ignition is switched off.
*4 When set to 0 seconds, the lights-on reminder is operable.
The following “Personalization Features” are available. These settings can only be changed by an Authorized
Mazda Dealer.
Item Feature Factory Setting Available Settings
Daytime running
lights
The function of the daytime running lights can
be changed.
On Off
Personalization Features
9-13
To Next Page
Loading...
