4
–
31
When Driving
Instrument Cluster and Display
Each setting/adjustment for the active driving display can be performed on the center
display.
1. Select the
icon on the home screen and display the Settings screen.
2. Select the AD-Disp tab.
3. Select the desired item and perform the setting/adjustment.
Method for adjusting screen brightness (automatically/manually)
Screen brightness initial settings (automatic adjustment is selected)
Screen brightness adjustment (manual adjustment is selected)
Display position of active driving display (display height)
Turn by turn (TBT) display/non-display (navigation guidance)
Street name display timing can be changed (navigation guidance)
Tachometer display/non-display
Active driving display ON/OFF (indication)
Reset settings (reset)
NOTE
The desired driving position (display position, brightness level, display information) can be
called up after programming the position.
Refer to Driving Position Memory on page 2-8.
Mazda6_8FH2-EA-16F_Edition1.indb 31 2016/05/10 19:23:06
To Next Page
Loading...
