4
–
38
When Driving
Instrument Cluster and Display
*Some models.
Signal Indicator Page
*
Blind Spot Monitoring (BSM) OFF Indicator Light
*1
4-99
(Green)
*
i-ELOOP Indication Light 4-82
(White)
*
Cruise Main Indication 4-156
(Green)
*
Cruise Set Indication 4-156
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an
Authorized Mazda Dealer.
Wrench Indicator Light
*
When the ignition is switched ON, the
wrench indicator light turns on and then
turns off after a few seconds.
The wrench indicator light turns on under
the following conditions:
When the preset maintenance period has
arrived.
When its time to replace the engine oil.
Refer to Maintenance Monitor on page
6-18.
Low Engine Coolant Temperature
Indicator Light (Blue)
*
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
Mazda6_8FH2-EA-16F_Edition1.indb 38 2016/05/10 19:23:15
To Next Page
Loading...
