6
–
39
Maintenance and Care
Owner Maintenance
2. Twist a tape-wrapped athead
screwdriver in the direction of the
arrow and open the cover slightly.
Cover
3. Insert the tape-wrapped athead
screwdriver into the gap and slide it in
the direction of the arrow.
Gap
4. Twist the athead screwdriver in the
direction of the arrow and remove the
cover.
5. Remove the battery cap, then remove
the battery.
6. Insert a new battery with the positive
pole facing up, and then cover the
battery with the battery cap.
7. Close the cover.
8. Reinsert the auxiliary key.
Mazda6_8FH2-EA-16F_Edition1.indb 39 2016/05/10 19:24:37
To Next Page
Loading...
