Mazda CX-30 - Turn and Lane-Change Signals

Manual type
When adjusting the illumination angle
of the headlights, refer to the Settings
section in the Mazda Connect
Owner's Manual.
Select the proper headlight angle from
the following chart.
Front seat
Rear
seat
Load
Illumi-
nation
angle
(num-
ber)
Driver Passenger
× ―――0
××―― 0
×××― 1
× × ××2
× ――×3.5
×: Yes
―: No
▼
Daytime Running Lights
Some countries require moving
vehicles to have their lights on
(daytime running lights) during the
daytime.
The daytime running lights turn on
automatically.
NOTE
(Except Canada)
The daytime running lights can be
deactivated.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Turn and Lane-Change
Signals
▼
Turn and Lane-Change Signals
The ignition must be switched ON to
use the turn and lane-change signals.
▼
Turn Signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel
after the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever
to its original position.
1. Right turn
2. Right lane change
3. OFF
4. Left lane change
5. Left turn
The turn signal indicators in the
instrument cluster flash according to
the operation of the turn signal lever to
show which signal is working.
When Driving
Switches and Controls
4-49
CX30_8JP5-EA20K_Edition1_new 2020-7-22 15:50:09