Mazda CX-30 - Page 297

NOTE
When the system does not detect a
white (yellow) lane line on one side
only, the system does not operate on
the side that is not being detected.
When temporarily canceling the
system
The LAS goes on standby in the
following cases: The LAS operation is
automatically restored when the
system's operation conditions are met.

The system cannot detect white
(yellow) lane lines.

The vehicle speed is less than about
56 km/h (35 mph).

The turn signal lever is operated.

The accelerator pedal is depressed
abruptly.

The TCS/DSC is operating.

The TCS is turned o.

The steering wheel is operated.

The brake pedal is operated.
The function is temporarily stopped.
The LAS stops functioning in the
following cases:

The temperature in the forward
sensing camera (FSC) is too high or
too low.

The windshield around the forward
sensing camera (FSC) is foggy.

The windshield around the forward
sensing camera (FSC) is blocked by
an obstruction, causing poor forward
visibility.

Strong light (such as sunlight, or
headlights (high-beam) of
on-coming vehicles) is directed at
the forward sensing camera (FSC).
System malfunction
If there is a problem with the system,
the i-ACTIVSENSE status symbol
(warning/risk avoidance support
system) (white) and the i-ACTIVSENSE
warning indication/warning light on
the multi-information display turns on
and a message is indicated.
Refer to i-ACTIVSENSE Status Symbol
(Warning/Risk Avoidance Support
System) on page 4-88.
▼
Steering Wheel Operation Assist
When the system determines that the
vehicle might be deviating from its
lane, the steering wheel operation
assist operates.
The system notifies the driver that it
provided steering wheel operation
assistance on the multi-information
display and the active driving display.
Multi-information display (Basic
display)
When Driving
i-ACTIVSENSE
4-153
CX30_8JP5-EA20K_Edition1_new 2020-7-22 15:50:09