Mazda CX-30 - Page 308


(Manual transmission)
If the vehicle is stopped by the
SBSRC operation and the clutch
pedal is not depressed, the engine
stops.

When the system operates, the user
is notified by the multi-information
display.

The collision warning beep sounds
intermittently while the SBSRC
brake is operating.

If the vehicle is stopped by the
SBSRC operation and the brake
pedal is not depressed, displaying in
meter “Emergency Braking Activated.
Depress Brake Pedal to Hold Stop”,
after about 2 seconds and the
SBSRC brake is automatically
released.
▼
Collision Warning
If there is a possibility of a collision, the
collision warning sound is activated
continuously and a warning is
displayed on the active driving display
and the multi-information display.
Multi-information display
1. “BRAKE!” message is displayed
Active driving display
1. “BRAKE!” message is displayed
▼
Stopping the Smart Brake Support
[Rear Crossing]
(SBSRC)
System
Operation
The SBSRC can be changed to
inoperable.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
When the SBSRC is canceled, the SBS
OFF indicator light turns on.
NOTE
When the SBSRC is canceled, the
Smart Brake Support [Rear] (SBSR) is
also canceled.
When Driving
i-ACTIVSENSE
4-164
CX30_8JP5-EA20K_Edition1_new 2020-7-22 15:50:09