Mazda CX-30 - Page 446

Only use SAE 5W30 oil “Certified For
Gasoline Engines” by the American
Petroleum Institute (API).
Oil with this trademark symbol
conforms to the current engine and
emission system protection standards
and fuel economy requirements of the
International Lubricant Standardization
and Approval Committee (ILSAC),
comprised of U.S. and Japanese
automobile manufacturers.
Except U.S.A., Canada
Use SAE 5W30 engine oil.
Oil container labels provide important
information.
A chief contribution this type of oil
makes to fuel economy is reducing the
amount of fuel necessary to overcome
engine friction.
For maintenance service, Mazda
recommends Mazda Genuine Parts.
(Mexico)
SKYACTIVG
2.0 and
SKYACTIVG
2.5
Use API SM or higher, or ILSAC GFIV
or higher/SAE 5W30 engine oil. If SAE
5W30 engine oil is not available, use
SAE
5W20
engine oil.
The quality designation SM, or ILSAC
must be on the label.
SKYACTIVG 2.5T
Use SAE 5W30 engine oil. If SAE
5W30 engine oil is not available, use
SAE 0W30 or SAE 10W30 engine oil.
The quality designation SM or SN, or
ILSAC must be on the label.
▼
Inspecting Engine Oil Level
NOTE

If the engine oil level warning
indication/warning light turns on,
add 1 L (0.26 US gal, 0.22 Imp gal)
of engine oil.
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it o and wait at least 5
minutes for the oil to return to the
oil pan.
Maintenance and Care
Owner Maintenance
6-18
CX30_8JP5-EA20K_Edition1_new 2020-7-22 15:50:09