Mazda CX-8 - Page 609

Item Feature
Factory Set-
ting
Available Set-
tings
Settings
Change
Method
Blind Spot Mon-
itoring (BSM)
(page 4-84)
The system can be changed so that Blind Spot
Monitoring (BSM) does not operate.
*1
On On/Off A ―
Warning beep volume
*2
High
High/
Low/
Off
A ―
Distance Recog-
nition Support
System (DRSS)
(page 4-89)
The system can be changed so that Distance
Recognition Support System (DRSS) does not
operate.
*1
On On/Off A ―
The distance at which the vehicle ahead indi-
cated in the display illuminates in amber can be
changed.
Near Far/Med./Near A ―
Driver Attention
Alert (DAA)
(page 4-93)
The system can be changed so that Driver At-
tention Alert (DAA) does not operate.
*1
On On/Off A ―
360° View Mon-
itor (page 4-130)
Setting can be changed so that the 360° view
monitor is automatically displayed when the
ignition is switched to ON.
Off On/Off A ―
Setting can be changed so that the display of
the estimated forward line of progress is not
displayed.
On On/Off A ―
Setting can be changed so that the top view/
front view displayed while the vehicle is mov-
ing in the forward direction after reversing is
not displayed.
On On/Off A ―
Parking sensor
system (page
4-187)
Display
*3
/non-display
On On/Off A ―
Veh ic le
Door locks
(page 3-12)
Operation condition of auto lock/unlock func-
tion
Lock: When
Driving Un-
lock: IGN
Off
Lock: Out of
Park Unlock: In
Park/
Lock: Shifting
Out of Park/
Lock: When
Driving Unlock:
In Park/
Lock: When
Driving Unlock:
IGN Off/
Lock: When
Driving/
Off
AD
Specifications
Personalisation Features
9-11
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04