ENGINE
B–43
B
6. Install the chain tensioner and remove the
retaining wire.
Camshaft Sprocket, Variable Valve Timing Actuator (L3 (with variable valve timing mechanism)) Assembly
Note
1. Hold the camshaft using a suitable wrench on the cast hexagon as shown.
L8, LF, L3
L3 (with variable valve timing mechanism)
2. Tighten the camshaft sprocket lock bolt.
Tightening torque: 69—75 N·m {7.10—7.6 kgf·m, 50.9—55.3 ft·lbf}
AME2224E330
AME2224E077
AME2224E078
1731‑1E‑02C.book43ページ２００２年４月２６日 金曜日 午前１０時３０分
To Next Page
Loading...
