Need help?Do you have a question about the Mazda 13B-MSP and is the answer not in the manual?
General| Induction | Naturally Aspirated |
|---|---|
| Fuel System | Sequential multi-port fuel injection |
| Compression Ratio | 10.0:1 |
| Redline | 9, 000 RPM |
| Engine Type | Wankel rotary |
| Displacement | 1.3 L |
| Maximum Torque | 211 N⋅m (156 lb⋅ft) @ 5, 500 rpm (High Power version) |
Explains how to use the manual, including procedures, symbols, and units for service operations.
Details inspection, adjustment, and repair procedures, emphasizing detailed steps and illustrations.
Defines symbols and explains Warnings, Cautions, Notes, Specifications, and Upper/Lower Limits for safe and correct service.
Lists standard units and their conversions, including SI units and rounding rules for measurements.
Covers preparation, special tools, disassembly, and inspection during removal for basic service operations.
Organizes disassembled parts and provides cleaning guidance for reassembly, including safety warnings.
Covers adjustment, rubber parts care, hose clamps, and torque calculation formulas for various operations.
Covers electrical system basics, connector handling, and inspection procedures for proper electrical service.
Lists SAE standard names, abbreviations, and instructions for identifying vehicle-specific service specifications.
Covers general engine overhaul, mounting, and dismounting procedures for service.
Details step-by-step disassembly procedures for engine housings, including specific notes for each type.
Guides on inspecting housings, rotors, seals, bearings, and shafts for wear and proper function.
Covers inspection and replacement of eccentric shaft components, bearings, and related clearances.
Details inspection and replacement of main bearings and oil pump, including oil clearance measurements.
Guides on assembling rotors, housings, oil pumps, and related parts according to specifications.
Details procedures for cleaning, applying sealant, and assembling the oil pan and upper block.
Provides detailed technical specifications and measurements for engine components, including clearances and wear limits.
Lists and illustrates all Special Service Tools (SSTs) required for engine repair and maintenance procedures.
To Next Page
