MECHANICAL
01–10–32
Oil Seal Assembly Note
1. Temporarily install the oil seal with the squared
end of the oil seal spring fit into the slot of the oil
seal.
2. Push in the oil seal using an old oil seal.
3. Verify that the stroke of the oil seal is smooth and
there is no catching by pushing the oil seal with
your hand.
Cut-Off Seal Spring Assembly Note
1. Assemble the cut-off seal spring with the spring
end turned upward.
Note
• When replacing a cut-off seal with a new
one, assemble the seal with the pink surface
facing upward.
OIL SEAL SLOT
SQUARED END
CHU0110E026
OLD OIL SEAL
ROTOR
0.5—0.6 mm
{0.020—0.023 in}
CHU0110E027
ROTOR
ROTATION LOCK PIN
PINK PAINT
CHU0110E028
To Next Page
Loading...